The MEG1 heating element can be used to turn most towel rails into either electric only or duel fuel. Please note that a T peice will be required for duel fuel use - see accesories section.

This Stylish Range of Thermostatic heating allows the temperture of the radiator to be selected between 30 - 60 degrees C in 7.5 degree intervals. Press the left button to reduce the temperature (press the right button to increase it). The LED lights indicate the temperature setting and the centre button is the on/off switch. These heating elements are of superior quality and are supported by a manufacturers 2 year guarantee. A selection of white, silver and chrome finishes. These elements can be utilised in other makes of radiators and heated towel rails so long as there is sufficient length for the element it fit. For assistance call 0121 382 3566 during office hours or email us at sales@stylishradiators.com

The REG2 heating element is regulated to 65 degrees C. The red ring light indicates when the element is switched on. A selection of white, silver and chrome finishes. This range of heating element are of superior quality and are supported by a manufacturers 2 year guarantee. These elements can be utilised in other makes of radiators and heated towel rails so long as there is sufficient length for the element it fit. For assistance call 0121 382 3566 during office hours or email us at sales@stylishradiators.com

This New heating element is available in either 200, 300, 600, 800 or 1000 watts.

The unique KTX3 allows the following:
Multistep temperature setting of the radiator from 30 to 60 degrees C.

LCD display with actual time (clock) and temperature.

Advanced timer features with 2 time settings.

High quality and modern design touch keyboard.

Double protection against overheating. Temperature sensor allows the radiator to reach 60 degrees C.

The control module is secured to the heating rod with an easy to install grub screw.

Heating rod sold separately. Select the required module and then the heating rod.

Ideal for use in heated towel rails for duel fuel or electric only applications. For duel fuel, you will also require a T piece addaptor (found on the accessories page)

KTX2 features:
5 step temperature setting
5 LED indicating lights for temperature
2 hour timer function (turn on and it will automatically turn off after 2 hours)
Available in silver or white finishes.

This new heating element is used in conjunction with the detachable heating rods detailed. Select the module required followed by the element required.

This New KTX1 heating element is available in either 200, 300, 600, 800 or 1000 watts.

The unique KTX1 allows the following:

Easy and simple use
Three steps output power setting (Off - Half power - Full power)
Can operate with 24 hour timer and external room temperature controller.
Double protection against overheating. Temperature sensor allows the radiator to reach 60 degrees C.
Device failure alarm indicator
The control module is secured to the heating rod with an easy to install grub screw.

Heating rod sold separately. Select the required module and then the heating rod.

KTX-4

• 5-step temperature setting in a range of 30-60 °C,
• IR module to communicate with external controller
• Drying function – with setting of power and time (from 1h to 4h)
• Actual work counter – enables to control power consumption
• Membrane keyboard
• 3 finishes – white, silver and chrome
• IP x5
• 1st Class security
• Power: 200W, 300W, 400W, 600W, 800W, 1000W
• Co-operates with Terma-SPLIT
• ANTIFREEZE function. prevents heating liquid from freezing
• Overheat protection
• Symmetric casing (installation on both sides)

Data Sheet: KTX4 Technical Sheet.pdf

Have contol over the temperature of the towel rail with this IR Controller. Used in conjuction with the KTX4 heating element module, set the ambient temperature you require in the bathrooom and the IR Controller will control the temperature of your electric towel rail.

(ONLY used with KTX4)

Data Sheet: KTX4 Technical Sheet.pdf